DELTA TAU WORKSTATION
990-828
18
Panel Mode
make sure that the
DeltaMotion
program is running.
2.
In the lower right hand part of the screen click the
SETUP
button.
3.
Now in the lower left hand part of the screen click
General Setting.
4.
There will be a series of check boxes on the left hand side of the
DeltaMotion
screen;
check for Hardware Panel Mode or un-check for Software Panel Mode
NOTE:
You do not have to
Save Changes
if you are changing just the Program
Execution Mode. ONLY upon disabling/enabling axes does one have to
Save
Changes
