Relieving cut:
To avoid tearing the bark on thick branches, always start by performing a relieving cut (1) on the
underside of the branch. To do this, apply the cutting attachment and pull it across the bottom
of the branch in an arc as far as the bar nose. Perform the cross-cut (2) – position the bar with
the hook against the branch and then perform the crosscut.
Flushing-cutting thick branches:
If branch diameter is more than 4 in (10 cm), first N perform
undercut (3) and thencross-cut at a distance of about 8 in./20 cm
(A) from the final cut.Then carry out the flush-cut (4),starting
with a relieving cut and finishing with a cross-cut.
Cutting above obstacles:
The unit's long reach makes it possible to prune branches
that are overhanging obstacles, such as rivers or lakes. The
tool angle in this case depends on the position of the branch.
Cutting from a lift bucket:
The unit's long reach enables cutting to be performed next to the
trunk without the risk of the lift bucket damaging other branches.
The tool angle in this case depends on the position of the branch.
Cross-cut:
To avoid pinching the bar in the cut,position the cutting attachment with the hook
against the branch and then perform the cross-cut from the top downwards.
-14-
Summary of Contents for PP.26.430
