AMA PP.26.430, Operator'S Manual

Page: 53 / 101

Note: Noise and vibration
1.The running at low speed can reduce the noise and quiver.
2.In order to reduce noise, the pole saw should be operated at an open environment.
3.The vibration can be lowered if the handle is grasped firmly.
4.In order to avoid disturbing others, the machine should be operated in daytime.
5.Dress personal protective equipment, such as gloves and ear protection during the operation.
6.The machine is not for professional work and not for long time operation.
7.In order to keep the user's fit and prolong the machine's life, please do not work more than 2 hours in a
whole day and don't keep working more than 10 minutes and often changing working positions.
Keep the chain, bar and sprocket clean;replace worn sprockets or chains. Keep the chain sharp.You can
spot a dull chain when easy-to-cut wood becomes hard to cut or burn marks appear on the wood. Keep chain
at proper tension.Tighten all nuts, bolts and screws except the carburetor adjustment screws after each use.For
maintenance items please also refer to the maintenance chart in this manual.Do not clean your machine with
a pressure washer. The solid jet of water may damage parts of the machine. Store the power tool in a dry and
high or locked location out of reach of children.Before storing for longer than a few days, always empty the
fuel tank. See chapter "Storing the machine" in this manual.Store fuel and chain oil in approved and properly
labeled safety-type canisters only. Take care when handling gasoline!Avoid direct contact with the skin and
avoid inhaling fuel vapor!
-12-