16
(4) Installing Cables: Connect to Main Machine, Lay out
Control System Circuit
Required Components: Cables, Cable Clamps, Electrical Tape, European Style Male/Female Terminals
Installing Steps: When stripping cable, do not cut the copper wire, connect European Style Male/Female Terminals based on
corresponding cable colors on the Main Machine. When laying out circuit, keep cables horizontal, vertical
and beautiful, the distance between Cable Clamps is 1.5m. (Overhead and ground operation)
Attention: Cables must be connected with same colors, for example, yellow green connect to yellow green, red connect
to red. Cables shall be covered by Electrical Tap and hidden in Main Machine, so as to prevent circuit from
phenomenon of short circuit or loose contact. (Or connect cable with junction box, optional)
Attention: Method of threading cables into Extension is shown as follow, remember to prevent circuit from contacting
screws.
Thr
ea
d
fr
om he
re
Thr
ea
d
fr
om her
e
Summary of Contents for AH-5
Page 1: ......