M92
Displays the estimated fluid sound velocity. If this value has an obvious
difference with the actual fluid sound speed, pipe parameters entered and the
transducer installation should be checked again.
M93
Displays total transit time and delta time(transit time difference)
M94
Displays the Reynolds number and the pipe factor used by the flow rate
program.
M95
M96
Not used
Not used
M97
Command to record the pipe parameters entered by the user either to the
built-in data logger or to RS-232C serial interface
M98
Command to record the diagnostic information either to the built-in data
logger or to RS-232C serial interface
M99
Command to copy the current display either to the built-in data logger or to
RS-232C serial interface
M+0
Browse the 64 recorded instrument power-on and power-off date and time
with the flow rate at the time of power on and off
M+1
Displays the total working time of the instrument
M+2
Displays the last power-off date and time
M+3
Displays the last power-off flow rate
M+4
Displays the times of instrument powered on(the instrument has been
powered on)
M+5
A scientific calculator for the convenience of field working.
All the values are in single accuracy.
The drawback is that the user can't operate it by direct key-pressing
M+6
Not used
M+7
Not used
M+8
Not used
M+9
Not used
M-0
Entry to hardware adjusting windows only for the manufacturer
-
20
-
www.automat.com.ar
Dr. R. Bielsa 175 (ex Morlote) C1427AZA Buenos Aires, Argentina. Tel.: (54111) 4555-0055 / Fax: (5411) 4555-0044
INSTRU Q-FP 201
Handheld Ultrasonic Flowmeter
Summary of Contents for Instru Q-FP 201
Page 30: ......
