Am Instru Q-FP 201 User Manual Download Page 3

Page: 3 / 32

-3-

Instru Q-FP 201 Handheld Ultrasonic Flowmeter

§4.5 How to use the totalizer multiplier

- - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.6 How to open or shut the totalizers

- - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.7 How to reset the totalizers

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.8 How to restore the flow meter with default setups

- - - - - - - - - - - - - - -

§4.9 How to use the damper

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.10 How to use the zero-cutoff function

- - - - - - - - - - - - - - - - - - - - - - - - - -

§4.11 How to setup a zero point

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.12 How to get a scale factor for calibration

- - - - - - - - - - - - - - - - - - - - - - -

§4.13 How to use the operation locker

- - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.14 How to use the built-in data logger

- - - - - - - - - - - - - - - - - - - - - - - - - -

§4.15 How to use the Frequency Output

- - - - - - - - - - - - - - - - - - - - - - - - - -

§4.16 How to use the Totalizer Pulse Output

- - - - - - - - - - - - - - - - - - - - - - -

§4.17 How to produce an alarm signal

- - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.18 How to use the built-in Buzzer

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.19 How to use the OCT output

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.20 How to modify the built-in calendar

- - - - - - - - - - - - - - - - - - - - - - - - -

§4.21 How to adjust the LCD contrast

- - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.22 How to use the RS232 serial interface

- - - - - - - - - - - - - - - - - - - - - - -

§4.23 How to view the Date Totalizers

- - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.24 How to use the Working Timer

- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.25 How to use the manual totalizer

- - - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.26 How to know how long the battery will last

- - - - - - - - - - - - - - - - - - - - -

§4.27 How to charge the built-in battery

- - - - - - - - - - - - - - - - - - - - - - - - - - -

§4.28 How to check the ESN and other minor details-

5.Troubleshooting

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§5.1 Power-on Error Displays and Counter-Measures

- - - - - - - - - - - - - - - -

§5.2 Error Code and Counter-Measures

- - - - - - - - - - - - - - - - - - - - - - - - - - -

§5.3 Other Problems and Solutions

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6. Communication Protocol

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§6. 1 General

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§6.2 Interface Pin-out Definition

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§6.3 the Protocol

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- 30

§6.4 Protocol Prefix Usage

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§6.5 Codes for the Keypad-

- 32

7. Service

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§7.1 Service

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

§7.2 Software Upgrade Service

Appendix

www.automat.com.ar

[email protected]

Dr. R. Bielsa 175 (ex Morlote) C1427AZA Buenos Aires, Argentina. Tel.: (54111) 4555-0055 / Fax: (5411) 4555-0044

Summary of Contents for Instru Q-FP 201

































Search results

Summary of Contents for Instru Q-FP 201

Reviews:

Related manuals for Instru Q-FP 201

Brands by name

Popular brands

Am Instru Q-FP 201, User Manual

Search results

Summary of Contents for Instru Q-FP 201

Reviews:

Related manuals for Instru Q-FP 201

Brands by name

Popular brands