background image

Easy and Rigid Mounting to the Aircraft:

This gimbal use a 5mm (2*2.5mm) thick 3K Carbon Frame which is super rigid to mount onto the bottom 
gimbal plate of Streak 800 directly or to DJI S800's Mount Bio-pod with unique metal mounts. Please be 
noted that Lensman-18 comes with no landing gear, since we will use the original Landing Gear from DJI 
S800 or Streak 800 Hexacopter. This is more environmental friendly and allows you to get this professional 
3-Axis gimbal with amazing price!

High Performance Metal Gear Digital Servos:

Servos are the heart of a gimbal. Lensman-18 use three pcs of 360 degree movement digital servos with 
metal gears. Two of them is used with an external potentiometer to make the maximum range of the 
movement for the gimbal. Together with POM M0.6 Main Gear and M0.6 Metal Servo Gear on the driving 
axises, the precision of the gimbal movement can be highly increased.

Easy Assembly Steps:

All Lensman-18 gimbal will be assembled (99% complete) by well-trained technicians and checked 
carefully before shipping. You will need only to put your own Laning Gear (from your DJI S800 or Streak 
800 Aircraft) with four screws and also the electronic controllers to the Electronic Mount (included) on the 
gimbal when you got the Kit. Clear instruction manual could be downloaded easily online.

3

Summary of Contents for ALLENS-18A













Reviews: