Step 12.
Adjust the Bipod Landing Gear Assemby as to
parallel with Lensman's body.
Step 13.
Repeat previous steps to install another side of
Bipod Landing Gear Assemby. Completed
Lensman-18 Assembly with Streak 800 Landing
Gear is shown above.
Step 14.
At least 5mm of Landing Gear Boom should be out
of the LG Metal Mount for secure installation. Same
for both two sides.
Step 15.
Remove two M3x8mm Screw from the Lensman's
body as to install the Carbon Fiber Gyro Mount.
Step 16.
Two M3x8mm Screws removed from the Lensman's
body.
Step 17.
Prepare the Carbon Fiber Gyro Mount from part
pack.
8
