Alvarion BreezeMAX PRO CPE, Manual

Page: 57 / 75

Unit Control Menu
TFTP Server IP address: the IP address of the TFTP server used for SW version
download.
SW File Name: the name in the TFTP server of the SW version to be
downloaded to the unit.
4.4.4.4.2 TFTP Server IP Address
Select this option to change the IP Address of the TFTP server.
The default TFTP Server IP address is 192.168.254.250.
4.4.4.4.3 SW File Name
Select this option to enter the name in the TFTP server of the required SW file.
4.4.4.5 Perform SW Download
Select this option to execute the SW download operation. To avoid unintentional
actions you will be prompted to confirm the request.
To perform SW download:
1
The required SW file should be available in the TFTP Server directory in a PC
connected to the unit.
2
Typically it is recommended to configure the IP address of the PC to
192.168.154.250, which is the default TFTP Server IP address of the unit. If a
different IP address is configured in the PC with the TFTP, configure the TFTP
Server IP Address to the same address.
3
Enter the name of the SW file (as called in the TFTP server) as the SW File
Name.
4
Select Perform SW Download and confirm the download request. Wait to
receive a success/failure message.
5
Following a successful download, the loaded SW version becomes the Shadow
version in the unit.
4.4.5 Configuration Control
4.4.5.1 Set Factory Defaults
Select this option to reset the unit and revert to the default configuration. To
avoid unintentional actions you will be prompted to confirm the request. All
parameters except the Password will revert to the factory default values.
BreezeMAX PRO CPE
41