MST Installation Instructions
Page 14 [email protected] +1(909) 591-8431 www.alvaradomfg.com
Installation Instructions
1.
Place the two halves of the top bearing cover over
the top bearing and align the mounting holes.
2.
Using an Allen wrench, Insert and tighten the six
10-32 x ½" Allen head mounting screws
(Figure 23).
Mounting Screw
Bearing Cover Installation
Top Bearing Cover Installation
Bottom Bearing Cover Installation
1.
Place the two halves of the bottom bearing cover
over the bottom bearing and align the mounting
holes.
2.
Using a screwdriver, tighten the two mounting
screws (Figure 24).
Fig. 23
Fig. 24
NOTE
For illustration and clarity purposes only, the bearing cover
illustrations are shown without the surrounding sections.
Screwdriver
10-32 Allen
Head Screw
Allen Wrench
Top Bearing
Covers
