КОМПЛЕКТ АМ-5000KIT
|
АМ-5000KIT AUTOMATION SET
73
MOUNTING
50
ø 8
Figure 11.
Mounting a front fitting
1
2
3
Figure 12.
Mounting the drive on a rear fitting
!
Figure 13.
Mounting the drive
on a front fitting
Figure 14.
After the drive is mounted,
the connector must not contact the enclosure
4.3
MANUAL RELEASE
To release the drive (
fig.
15), use the special key supplied with the drive kit. Turn the key to ~ 180 º
towards the
OPEN
label. To return the drive to the locked (engaged) state, turn the key towards
the
CLOSE
label. Once you have locked it, move the leaf manually, slowly, without shocks or
impacts until you hear a distinctive engagement click.
Table 3