6.
Primary WINS/Secondary WINS:
This feature allows you to assign a WINS Servers
7. Gateway:
The Gateway Address would be the IP address of an alternate Gateway.
This function enables you to assign another gateway to your PC, when DHCP server
offers an IP to your PC.
After you finish your selection then
Either Click on
“Save”
to store what you just pick or click “
Undo”
to give up
Advanced Setup > Basic Setting > Wireless
Wireless - Enabled
is the
default.
Selecting this option will allow you to set
your Wireless Access Point (WAP) settings.
WMM Capable-
Choose Enable or Disable WMM function
SSID-
Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID's factory
default
setting is
default
. The
SSID can be easily changed to establish a new wireless network.( Note: SSID
names may contain up to 32 ASCII characters).
Channel- Channel 11
is the
default
. Devices on the network must share the
same channel. (Note: Wireless adapters automatically scan and match the
wireless settings. You may also select the channel you wish to use).
Security-
You may select from three levels of encryption to secure your wireless
network:
No Encryption, WEP.802.1x, WPA-PSK, WPA, WPA2-PSK, or WPA2.
Security- No Encryption
is the
default
(as shown in the screen above)
.
1.
WEP Security
: Select the data privacy algorithm you want. Enabling the
security can protect your data while it is transferred from one station to another.
The standardized IEEE 802.11 WEP (128 or 64-bit) is used here.
