Altusen KN2132 User Manual Download Page 232

Page: 232 / 310

KVM Over the NET™ User Manual

216

A description of the fields is given in the table, below:

Fill in or modify the fields, then click

to finish.

Events

The Events Menu has two items:

Search

and

Maintenance

Search:

Search

allows you to search for events containing specific words or strings.

When you access this function, a screen, similar to the one below, appears:

Field

Explanation

Address

This can either be the IP address of the computer the Log Server is
running on, or its DNS name.

Port

The port number that was assigned to the Log Server under

Device

Management

(see

Log Server

, page 159).

Description

This field is provided so that you can put in a descriptive reference for
the unit to help identify it.

Limit

This specifies the number of days that an event should be kept in the
Log Server's database. Events that exceed the amount of time
specified here can be removed with the Maintenance function (see

Maintenance:

, page 217).

Summary of Contents for KN2132























































































































































































































































































































Search results

Summary of Contents for KN2132

Reviews:

Related manuals for KN2132

Brands by name

Popular brands

Altusen KN2132, User Manual

Search results

Summary of Contents for KN2132

Reviews:

Related manuals for KN2132

Brands by name

Popular brands