Altusen KM0216 / KM0432, User Manual

Page: 26 / 92

KM0216 / KM0432 User Manual
12
Before you Begin
Stacking and Rack Mounting
The KM0216 / KM0432 can be stacked on the desktop or rack mounted by a
variety of different methods in 1U of rack space. The procedures for each
method are described in the following sections.
Note: Allow at least 5.1 cm on each side for adequate ventilation and 12.7 cm
at the rear for power cord and cable clearance.
Stacking
The KM0216 / KM0432 can be placed on any level surface that can safely
support its weight and the weight of the attached cables. Ensure that the surface
is clean and free of materials that can block the exhaust vents or otherwise
interfere with normal operation of the switch. A foot pad set is included with
the unit. Peel the protective backing off of the foot pads, and then affix the foot
pads to the bottom panel of the KM0216 / KM0432 at the corners, as shown in
the diagram below.
1. Important safety information regarding the placement of this
device is provided on page iv. Please review it before proceed-
ing.
2. Ensure that all equipment to be connected is powered off.
3. Make sure that all devices you will be connecting up are
properly grounded.
4. Unplug the power cords of any computers that have the
Keyboard Power On function.