Altusen KL1508a User Manual Download Page 67

Page: 67 / 96

Chapter 7

The Firmware Upgrade Utility

Introduction

The purpose of the Windows-based Firmware Upgrade Utility is to provide an
automated process for upgrading the KL1508

/ KL1516

and compatible

adapter cable firmware. The program comes as part of a Firmware Upgrade
Package that is specific for each device.

The latest revisions of new firmware for the KL1508

/ KL1516

, and

supported KVM Adapter Cables are posted as Firmware Upgrade Packages on
our web site. Check the website regularly to find the latest firmware packages
and information relating to them.

Note:

1. A single upgrade package contains the upgrade files for the Main

Board and all the supported KVM Adapter Cables.

2. KVM Adapter Cables are referred to as

I/O Modules

in some dialog

boxes.

Before You Begin

To prepare for the firmware upgrade, do the following:

1. From a computer that is not part of your KVM installation go to the ATEN

Internet support site and choose the model name that relates to your device
to get a list of available Firmware Upgrade Packages.

2. Choose the Firmware Upgrade Package you want to install (usually the

most recent), and download it to your computer.

(Continues on next page.)

Summary of Contents for KL1508a

































































































Search results

Summary of Contents for KL1508a

Reviews:

Related manuals for KL1508a

Brands by name

Popular brands

Altusen KL1508a, User Manual

Search results

Summary of Contents for KL1508a

Reviews:

Related manuals for KL1508a

Brands by name

Popular brands