Altusen KH98, User Manual, Page: 53 / 72

Chapter 4. Hotkey Operation
37
Skip Mode
This feature allows you to switch between computers in order to monitor them
manually. You can dwell on a particular port for as long or as little as you like
- as opposed to Auto Scanning, which automatically switches after a fixed
interval. To invoke Skip Mode, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 33).
2. Key in [Arrow]
Š Where [Arrow] refers to one of the Arrow keys. After you press
[Arrow], you automatically exit Hotkey Mode, and enter Skip Mode
where you can switch ports as follows:
Š Once you are in Skip Mode, you can keep on skipping by pressing the
Arrow keys. You don't have to use the [NumLock] + [-] combination
again.
Š While Skip Mode is in effect, ordinary keyboard and mouse functions
are suspended - only Skip Mode compliant keystrokes can be input.
You must exit Skip Mode in order to regain normal control of the
console.
3. To exit Skip Mode, press [Esc] or [Spacebar] .
←
Skips from the current port to the first accessible port previous to it.
(See
Scan/Skip Mode , p. 25, for information regarding accessible
ports.)
→
Skips from the current port to the next accessible port.
↑
Skips from the current port to the last accessible port of the previous
Station.
↓
Skips from the current port to the first accessible port of the next
Station.