Altusen KH98, User Manual

Page: 50 / 72

KH98 User Manual
34
Š Pressing [Esc] or [Spacebar] exits Hotkey Mode.
Selecting the Active Port
Each Computer Port is assigned a Port ID (see Port ID Numbering , p. 16). You
can directly access any computer on the installation with a Hotkey combination
that specifies the Port ID of the Computer Port that the computer is connected
to. The steps involved are:
1. Invoke Hotkey Mode (see p. 33).
2. Key in the Port ID
The Port ID numbers display on the Command Line as you key them in. If
you make a mistake, use
[Backspace] to erase the wrong number.
3. Press [Enter]
After you press [Enter], the KVM focus switches to the designated
computer and you automatically exit Hotkey Mode.
Port Key In Examples:
To access a computer attached to Port 3 on a Single Stage installation, key in 3
for the Port ID, as follows:
[Num Lock] + [*] 3 [Enter]
To access a computer attached to Port 3 on a Second Stage unit that is cascaded
down from Port 2 of the First Stage, key in
2 3 for the Port ID, as follows:
[Num Lock] + [*] 2 3 [Enter]
Note: The numbers should be keyed in one at a time.
Š To access a computer attached to Port 8 on a Third Stage unit that links
back to port 4 of a Second Stage unit linking back to CPU Port 6 on the
First Stage unit, key in
6 4 8 for the Port ID, as follows:
[Num Lock] + [*] 6 4 8 [Enter]