Altusen KA9233 User Manual Download Page 13

Page: 13 / 99

KA9233 User Manual

xiii

Technical Support

International

North America

When you contact us, please have the following information ready beforehand:

Product model number, serial number, and date of purchase

Your computer configuration, including operating system, revision level,
expansion cards, and software

Any error messages displayed at the time the error occurred

The sequence of operations that led up to the error

Any other information you feel may be of help

Technical Phone Support

1. Contact your local dealer.
2. Call the ALTUSEN Technical Support Center:

886-2-8692-6959

Email Support

Email your questions and concerns to:
[email protected]

Online Support

Technical Support

Troubleshooting

Documentation

Software Updates

1. Online technical support is available to ALTUSEN cus-

tomers through our e-Support Center:

http://support.aten.com

2. Online troubleshooting that describes the most

commonly encountered problems and offers possible
solutions to them; online documentation (including
electronically available manuals); and the latest drivers
and firmware for your product are available at our
Website:

http://www.aten.com

Technical Phone Support

Registered ALTUSEN product owners are entitled to
telephone technical support. Call the ALTUSEN Technical
Support Center: 1-888-999-ATEN

Email Support

Email your questions and concerns to:
[email protected]

Online Support

Technical Support

Troubleshooting

Documentation

Software Updates

1. Online technical support is available to ALTUSEN cus-

tomers through our e-Support Center:

http://www.aten-usa.com/support

2. Online troubleshooting that describes the most

http://www.aten-usa.com

Summary of Contents for KA9233




































































































Search results

Summary of Contents for KA9233

Reviews:

Related manuals for KA9233

Brands by name

Popular brands

Altusen KA9233, User Manual

Search results

Summary of Contents for KA9233

Reviews:

Related manuals for KA9233

Brands by name

Popular brands