50
Operating Instructions
GB
REFUELLING
Operating the dumper on low fuel levels can sometimes allow air to enter the fuel system, this may cause a loss or reduction of power.
To prevent this, always refuel when the fuel guage is showing low fuel level.
,IWKHUHLVDLULQWKHIXHOVXSSO\\RXKDYHWRVWRSWKHHQJLQH¿OOWKHIXHOWDQNDQGEOHHGWKHIXHOV\VWHPWRUHPRYHWKHDLU
Refuelling the dumper at the end of each working period will help to prevent condensation forming of the walls of the fuel tank.
7R¿OOWKHGLHVHOWDQN
1. Park the dumper safely on stable, level ground (see page 39)
2. Stop the engine and remove the key from the ignition.
3. Clean the area around the fuel cap (Figure 25, Item A).
4. Unscrew and remove the fuel cap from the fuel tank.
5. Observe the fuel level sight gauge (Item B) and stop fueling when
gauge shows fuel tank is full.
NEVER
RYHU¿OOWKHIXHOWDQN
6. Replace the fuel cap and hand tighten. Over-tightening the fuel
cap will damage it.
DIESEL ONLY! DO NOT use petrol in this dumper!
WARNING
A
B
Figure. 25
A. Fuel Cap
B. Fuel Level Sight Gauge
USB PORT
This dumper is installed with a 5v - 2.1A USB (Universal Serial Bus) port which can be used for charging your smartphone or
other 5v portable devices. See Operator Station Components (Page 12)
When the USB port is used and the engine is running the connected device will charge automatically.
ONLY
connect devices which are compatible with the 5v port.
ALWAYS
enure the port cap is closed when the port is not in use to prevent water damage.
DO NOT exceed the maximum power rating of the socket other wise there is a risk of damaging the port.
CAUTION
