35
Operating Instructions
GB
OPERATOR SEAT
Before sitting down on the seat, ensure the seat pan is closed and locked.
The seat can be adjusted to suit the operators requirements. Any adjustments must only be made when the dumper is stationary
and the parking brake is applied.
If the seat becomes damaged, stop using the dumper immediately. The dumper can only be used again once the seat has been
repaired or replaced.
HORIZONTAL ADJUSTMENT
1. Lift the lever (Figure 9, Item A) upwards and simultaneously move the seat forwards or backward.
2. To lock the seat in place, release the lever.
BACKREST ADJUSTMENT
1. Lift the lever (B) upwards and simultaneously and press against the backrest to the required position.
2. To lock the seat in place, release the lever.
WEIGHT ADJUSTMENT
1. Rotate the weight adjustment knob (C) to increase or decrease the suspension of the seat to suit the operators weight.
2. Check the weight indicator (D) and rotate the weight adjustment knob to select the correct weight from the scale.
ALWAYS position the seat so the operator can reach the dumper controls without stretching.
NEVER alter the position of the seat whilst the dumper is moving.
WARNING
Figure. 10
A. Horizontal Adjustment Lever
B. Backrest Adjustment Lever
C. Weight Adjustment Knob
D. Weight Indicator
A
B
C
D
