2.
Verify that the add-in video controller card is fully seated in its slot.
3.
Reboot the system for the changes to take effect.
4.
If there are still no characters on the screen after you reboot the system, reboot it
again.
Take note of the beep codes emitted during POST. This information may be required
if you seek technical assistance.
If POST does not emit any beep code and characters still do not appear, the display
monitor or the video controller may be defective. Contact your local Altos
representative or authorized dealer for technical assistance.
Note:
If POST does not emit any beep code and characters still do not appear,
the display monitor or the video controller may be defective. Contact your local
Altos representative or authorized dealer for technical assistance.
