12
Rear Assembly
5
You can now install the first roof corner bar. Position the notched end onto
the eaves bar (diagram 11). Next locate the lap joint at the top of the gable
glazing bar. First of all secure the lap joint with two 40mm screws
though the pilot holes you drill previously (diagram 10).
You then need to drill a pilot hole through the roof corner bar.
You want the screw to go through the tennon in the end
of the side glazing bar so make sure you keep the drill
as vertical and true as possible. The hole should be
about 42mm from the end of the bar (diagram 9).
Once you have done this fix it with a 80mm
screw. This will secure the roof corner
bar to the eaves bar and the eaves
bar to the side corner bar in
one go.
Dia. 11
Dia. 10
Dia. 12
Once you have fixed the joint
with the 80mm screw
(diagram 9) fix the rear cill to
the aluminium base with
25mm screws.
80mm Sc
rew
EV0013
EV0057
EV0301
M
Diagram 9
External
