11
Rear Assembly
5
EV
00
13
EV0060
Pilot hole
50mm
Diagram 8
Dia. 9
(page 12)
EV0060
EV0061
EV0013
Dia. 8
Locate the rear cill and rear gable glazing bars (these are
different to the front gable glazing bars as they do not have
the mortise for the door header).
Start by drilling pilot holes in the cill section through the
mortise holes as before (diagram 8). Also drill 2 holes
in the top of the gable glazing bars through the
lap joint location. These should be 25-30mm
apart and the first hole should be a
similar distance from the very top
edge (see right)
Assemble the gable glazing bars with
the rear cill flat on the ground as
you did with the side sections.
Again with the aid of a helper or using
a prop position the rear end onto the
aluminium base. Locate the end of
the cill into the mortise on the side
corner bar (diagram 9, page 12).
Part
Number
Size
(mm)
Qty
EV0013 3796 1
EV0044 2153 1
EV0045 2153 1
12ft Rear
Part Name
Cill
Roof Corner R
Roof Corner L
Side Corner R
EV0056 1650 1
Side Corner L
EV0057 1650 1
Gable Bar R
EV0060 1994 1
Gable Bar L
EV0061 1994 1
Mid Gable Bar
EV0076 2502 1
Gable Bar L
EV0065 2288 1
Gable Bar R
EV0064 2288 1
30mm
30mm
EV0061
Internal
Internal
NB
there
are
no
mortise
holes on
these
gable
bars.
EV0072
EV0076
EV0073
