altomed.com
Page 18
STEP 4
Connect the air/fluid tubing (
Item 5
) to the quick disconnect (dual) fitting (
Item 2
) on the bottle
cap. It will “click” when the connection is secure.
At the front of the unit, install the rinse lines through the pinch valves (see Figure 5c below). The
BLUE tubing line MUST run through the
Fluid
valve. The CLEAR line MUST run through the
Air
valve.
STEP 5
(Optional footpedal) Only use an Altomed footpedal.
Connection of Optional Footpedal
Figure 5d
Installing Fluid and Air Lines
Figure 5c
