IN THIS MANUAL:
1. INTRODUCTION........................................................................1
2. FEATURES...............................................................................1
3. CONTROL ELEMENTS..............................................................2
4. USER SETUP...........................................................................4
5. INSTALLATION & CONNECTION.................................................7
6. TECHNICAL SPECIFICATIONS..................................................10
7. WARRANTY...........................................................................11
2. FEATURES
Thank you for your purchasing of the LTO TERMINATOR II. The TERMINATOR II
is a Dual Channel Digital Processor. It is designed to provide state of the art
Feedback elimination processing, for fixed installation or live event, while
maintaining a simple and intuitive control interface.
The TERMINATOR II provides up to 24 filters per channel (CH1 & CH2), offers
independent selectable modes, live filters lift, process bypasses, continuously
variable types of filtration, with widths between
and
Octave of which
are all available on a intuitive user interface front panel.
th
th
1/80
1/5
Enjoy your TERMINATOR II and make sure to read this Manual carefully before
operation!
24 Programmable Filters per Channel
Dual Independent Channel Processing
Live and Fixed Filter Modes
Automatic Live Filter Release
Selectable Application of
proprietary Filter Variations (Music/Speech)
LTO
2 Input Channel Metering
24 LED Filter Metering per Channel
2 XLR and 2 x TRS Electronically Balanced Inputs and Outputs
Selectable Operating Level Switches (+4 dBu / -10 dBv)
Rear Panel Lockout Switch
1
1. INTRODUCTION
2 x female XLR and 2 x 1/4" TRS
Electronically Balanced / Unbalanced, RF filter suppressor
Max Input line level
2 x male XLR and 2 x 1/4" TRS
Electronically Balanced / Unbalanced, RF filter suppressor
Max Output level
Dynamic Range
D/A Performance
D/A Conversion
Sample Rate
THD+N %
Power Consumption
Power Requirement
6. TECHNICAL SPECIFICATION
Analog Inputs
Input impedance
30k ohm Balanced / 15k ohm Unbalanced
+20.5 dBu
Analog Outputs
Output impedance
100 Ohm Balanced / 50 Ohm Unbalanced
+14.5 dBu
A/D Performance
114 dB, A-weighted
A/D Conversion
24 bit
Dynamic Range
100 dB, A-weighted
24 bit
System Performance
48 kHz
Dynamic Range
100 dB, A-weighted
0.01 %, 1 kHz
Frequency Response
20 Hz to 20 kHz, +/- 0.5 dB
Inter channel Crosstalk
Crosstalk input to output
Operating Voltage
230 VAC 50/60 Hz 115 VAC 50/60 Hz
15 W
10
100 dB, A-weighted
100 dB, A-weighted
Physical
S/N Ratio
100 dB, A-weighted
Dimension
Net Weight
483 x 195 x 44 mm
3.1kg
