MN-38954 • Rev 0 • 04/17 • Quickchillers 9
Installation
Installation Requirements
The model QC3-3 is a counter mounted Quickchiller
and must use legs that allow for a 4" (102mm) clearance
between the cabinet and the counter.
For all other
models, install
the Quickchiller
on a smooth and
level floor surface. Use the adjustable
cabinet legs to level the Quickchiller.
Adjust from front-to-back and from side-to-side to
evenly distribute the cabinet weight and avoid pulling
the cabinet alignment out of square.
After leveling the cabinet, check that the door handle
is aligned properly. Also check the height relationship
of the optional roll-in cart to the cabinet. Adjust the
Quickchiller height as needed to accommodate the cart
and to securely close the Quickchiller door.
Door Seal:
Check the door gasket to make certain it is sealing
properly and that the gasket provides an even and
positive seal around the entire door frame.
Refrigeration (QC3-100R Remote)
Alto-Shaam does not offer recommendations on
maximum run sizes. Best refrigeration piping practices
should always be followed and piping for any longer
runs is the responsibility of the installer.
How to install the QC3-100 trolley guides
1. A
lign each guide rail with the holes located
under the cabinet.
(
A
)
2. Fasten each guide rail with washer, lock washer
and bolt.
3. Push the roll-in cart (trolley) into the
Quickchiller and close the door.
4. At the front of the Quickchiller, make certain
contact has been made between the Quickchiller
and the cart along the total width of the door to
create a complete seal. When a full seal has been
determined, recheck each connection to make
certain it has been fully tightened.
CAUTION
Appliance and accessories may be
heavy. To prevent serious injury,
always
use a suff icient number of trained and
experienced workers when moving or
leveling appliance and handling accessories.
A
