Alto-Shaam Halo Heat 1200-S, Installation, Operation And Maintenance Manual

Page: 26 / 43

1200-S, 1200-UP •
INSTALLATION
/
OPERATION
/
SERVICE MANUAL
-
PG
. 25
S E R V I C E
SERVICE PARTS LIST - MANUAL CONTROL
DESCRIPTION 1200-S 1200-UP
1. Bonnet Assembly, Spot 5008316 5008316
2. Bushing, Cord Strain Relief BU-3964 BU-3964
3. Bushing, Snap, 1-1/2" BU-3013 BU-3013
4. Connector CR-34559 CR-34559
5. Control, Manual CC-34488 CC-34488
6. Control Panel Bezel PE-28280 PE-28280
7. Control Panel Overlay, Manual PE-28451 PE-28367
8. Cordset, Manual
120V
208-240V
230V
CD-3232
CD-3551
CD-3922
CD-33824
CD-3551
CD-3922
9. Gasket, Self Adhesive GS-2019 GS-2019
10. Nut, Hex, M4-0.7, 18-8 NU-22286 NU-22286
11. Plug, Dome, .187" hole PG-28439 PG-28439
12. Plug, Hole 3/8" PG-25574 PG-25574
13. Plug, Hole 13/16" PG-3589 PG-3589
14. Screw, 6-32 x 1-1/4" Round Head SC-2365 SC-2365
15. Screw, 8-32 x 1/4" Phil Screw SC-2459 SC-2459
16. Screw, Ground, 10-32 x 1/4" Pan Head SC-2190 SC-2190
17. Switch, Rocker
120V
208-240V
230V
SW-34375
SW-34351
SW-34351
SW-34375
SW-34351
SW-34351
18. Tape, .375" wide foam GS-23622 GS-23622
19. Terminal Block BK-3019 BK-3019
20. Thermostat Knob, Manual KN-26568 KN-26568
21. Washer, M4 Split Lock S/S 18-8 WS-22300 WS-22300
22. Washer, #10 Nylon WS-2420 WS-2420
23. Washer, Star Lock WS-2467 WS-2467
D A N G E R
DISCONNECT UNIT FROM
POWER SOURCE BEFORE
CLEANING OR SERVICING.
C A U T I O N
THIS SECTION IS PROVIDED FOR THE ASSISTANCE
OF QUALIFIED SERVICE TECHNICIANS ONLY AND
IS NOT INTENDED FOR USE BY UNTRAINED OR
UNAUTHORIZED SERVICE PERSONNEL.