Page 8
SS-UV40
Installation & Users Manual
Product Overview
Description
The SS-UV40 LED is comprised of an array of IP65 rated ultraviolet lighting extrusion modules coupled to an
IP65 enclosure with a water resistant power supply cord and male and female DMX-512 data supply cords.
The overall construction of the fixture includes corrosion protected aluminum housing and includes mounting
brackets. All brackets on the LED module can be removed and repositioned if required.
The outdoor power and control box is a powder painted steel enclosure with a gasket hinged cover and
mounting brackets. The mounting brackets can be used with the UV module oriented horizontally or verti-
cally. Individual swivel adjustment of the separate UV modules allows for precise control of beam direction
and overall coverage. The fixture is supplied with a state of the art microprocessor-controlled solid-state LED
light engine incorporating four 365nm LEDs and an on-board power supply. The LED substrate is coupled to a
highly efficient circuit board and convection heat sink cooling system for prolonged life of the LEDs. All com-
ponents and electrical devices are ETL or UL listed or recognized and most are VDE or TUV approved for CE
and RoHs compliance.
The SS-UV40 UV LED light modules are specified with lenses at order. Lenses are not interchangeable and the
modules are sealed from the factory.
Components
The SS-UV40 LED includes the follwing components:
•
4 qty. SS-UV40 extrusion modules
•
IP65 rated power and control enclosure box
•
Power supply cord with bare end for permanent installation wiring
•
DMX input and output with IP65 rated XLR connections
•
Installation and Instruction manual
•
Mounting brackets
