background image

Page 13

SS-UV40

Installation & Users Manual

612 = Personality #12   

16 Bit,   

 

 

 

Smoothing ON

 (uses 1 DMX channel)

RESOLUTION is selectable as either:

• 

8 Bit (one DMX channel per color) this is normal resolution,

• 

16 Bit (two DMX channels per color Fine high resolution similar to moving lights).

SMOOTHING is selectable as ON or OFF and provides a smooth transition ramp from one level to another in 

a similar way to how an incandescent lamp behaves. This helps to eliminate the “steppiness” associated with 

LED fixtures that is caused by the instantaneous response of LEDs.

Stand-Alone Effects

This feature will operate the UV40 without the need for a separate control console.

Note: stand-alone effects from a single unit will control other units connected via DMX cable to all

synchronize. Set other units to DMX Channel 001.

UV Fades (700-799):

700 - 709 = 1>4>2>3 fade  

 

 

700 = faster 709 = slower

740 - 749 = 3>2>4>1 fade  

 

 

740 = faster 749 = slower

780 - 789 = 1>4>2>3>A fade    

 

780 = faster 789 = slower

790 - 799 = A>3>2>4>1 fade    

 

790 = faster 799 = slower

UV Strobes (800-879):

800 - 809 = ALL STROBE  

 

 

800 = faster 809 = slower

810 - 819 = 1 STROBE  

 

 

810 = faster 819 = slower

820 - 829 = (Reserved)  

 

 

820 = faster 829 = slower

830 - 839 = 2 STROBE  

 

 

830 = faster 839 = slower

840 - 849 = 3 STROBE  

 

 

840 = faster 849 = slower

850 - 858 = 1-4-2-3 RAINBOW STROBE  

850 = faster 859 = slower

870 - 879 = 3-2-4-1 RAINBOW STROBE  

870 = faster 879 = slower

CAUTION - Unless the Primary and Replica mode has been disabled, use of the SS-UV40 Stand-

Alone Effects feature while connected to a control console will result in a conflict. See instruc-

tions below.

Key:

1 = UV1 - UV LED Module One

2 = N/A - Not Available or Dark.

3 = N/A - Not Available or Dark.

4 = N/A - Not Available or Dark.

A = LED Module UV will activate.

Stand-Alone Intensity

While in stand-alone mode, the hundreds button cycles through each pod. (r = UV1; G

= UV2; b = UV3; A = UV4). The tens and ones digits select 0-99 values. 99 is actually full. The 0-255

scale is spread evenly over the 0-99 display range.

Summary of Contents for SPECTRA SS-UV40
















Reviews: