4K Wallplate HDBaseT Transmitter
8
the HDBaseT Receiver/ Matrix Switcher will be located (somewhere near the
display device).See the installation instructions for the 70M HDBaseT Receiver.
③
If using the Control Panel, run another twisted pair cable from the TP70WPB-EU
location to the location that the Control Panel will be mounted.
④
All Cat5e/6/7 cables should be terminated with jacks. This allows the permanent
link between the two devices to be tested.
⑤
Use the appropriate category rated patch cable to connect the HDBaseT link to
the HDBT OUT connector.
⑥
If using the WP8 Control Panel, use the supplied adapter cable to connect with
the second cable and follow the installation instructions for the HDBaseT Receiver
and WP8 Control Panel.
Note: We recommends Cat5e/6/7 cabling with alien crosstalk prevention technology for
the performance of HDBaseT link.
