4K Wallplate HDBaseT Transmitter
9
5.
Button Control
SOURCE/AUTO Button
Press and hold the SOURCE/AUTO button for 3 seconds. When the button lights up
green the TP70WPB-EU is in AUTO mode. This mode automatically selects the last
video source connected to the TP70WPB-EU and outputs it to the display. Press and
hold again for approximately 3 seconds, the light will go out, and the device will be in
Manual mode which will allow the user to momentarily press the button to toggle
between the two sources.
6.
RS232 Control
6.1 RS232 Connection
There are two RS232 control modes switching via sending 50779% or 50780%.
①
Control this TP70WPB-EU and far-end third-party device (such as Projector)
device by the local PC, and the connection diagram shown as below:
Tx Rx
12V
12V
RS232
IN
OUT
P
o
H
IN
H
D
B
T
O
U
T
Tx
Rx
HDMI OUT
HDBT IN
RS232
IR IN
IR OUT
PoC
Projector/Flat Screen Display
HDBaeT Receiver
PC
Cat 5e/6A
Cat 5e/6A
Wallplate HDBaeT Transmitter
HDBaseT:
RS232:
