Differences Between the IP 805 and the IP 705
8 I
P 805 User Manual
•
Call Recording
– Record calls by pressing a programmable key (this feature must be configured by the
system administrator). You press the button to start recording, then press the button again to stop
recording. There is no pause function. While a call is being recorded, the programmable key’s light is on.
Recorded conversations can then be played back through voice mail or accessed at a centralized loca-
tion.
•
Conference Calls
– Initiate and add colleagues to conference calls. See page 20 for details.
•
Workgroup Status
– View workgroup status in the LCD screen. See page 16 for details.
•
Hold
– Place the active call on hold. See page 21 for details.
•
Intercom
– Call an internal extension.
•
Line Park
– The system administrator can configure a button as a Line Park button. Pressing the button
will park the current call. See page 21 for details.
•
Programmable keys
– The system administrator can offer you programmable buttons, which you can
associate with a speed dial number or a feature code from the IP phone menu.
•
Redial
– Redial a number from the last 16 numbers dialed. See page 21 for details.
•
Release
– Hang up the active call or reject an incoming call. See page 22 for details.
•
Ring Tones
– Select from several different ring tones; see page 13.
•
Transfer Calls
– Transfer an active call. See page 22 for details.
•
Voicemail button
– Opens the voicemail system. See page 22 for details.
Differences Between the IP 805 and the IP 705
This section describes the primary differences between the IP 805 and other AltiGen phones.
Headset differences
•
When using a headset with the IP 805 phone, the
Headset
button remains illuminated after you end the
call. The next incoming call or intercom will ring into the headset instead of the speaker.
•
When the headset is enabled and the phone is in
Idle
mode, pressing the
Headset
button turns off the
headset.
•
When using a headset with the IP 805 phone, no dial tone will play when the other party disconnects or
when you press
Release
to end the call (unless #82 dial tone is disabled).
•
While using a headset with the IP 805 phone, if #82 (Hands Free Manual Answer Mode) is not enabled,
intercom calls will go to the headset instead of to the speaker. If #82 is enabled, the intercom will ring on
the headset.
•
For an up-to-date list of supported headsets for the IP 805, refer to AltiGen’s IP 805 web page at:
http://maxcs.com/solutions/business-class-voip-phones/ip-805/
The IP 805 headset port polarity is reversed; an adapter cable (MSC-HDSETCBL-IP805) is available
directly from AltiGen for headsets that are polarity-sensitive.
Menu differences
•
To select commands in the IP805 phone's menus, press the
Menu
button and use the
Up
and
Down
arrow buttons to scroll through the options. Press the
Menu
button to return to the previous menu, press
the
Enter
button to select a setting, and press
Release
to close all menus.
•
In the IP805 menus, the
Left
arrow button does not back out of menus; it allows you to edit an entry. Press
the
Menu
key to back out of menus.
Other differences
•
You cannot activate the IP 805 phone by entering the MaxCS IP address while the phone is in Basic
mode. For instructions on activating the IP 805, refer to the
Installation Guide
.
Summary of Contents for IP 805 Phone
