Micro VoIP 200
User Manual
v1.53
69
The second method is to put a FXO gateway in the LAN network and there could be two methods
for configuring Micro VoIP 200 to do the PSTN call:
a.
Configure the FXO gateway to register to Micro VoIP 200. If the FXO gateway registered to
Micro VoIP 200 with the registered number as 0, then, any extension IP Phone can dial 0# to
first connect to the gateway, and then dial the desired PSTN number. This is a two-stage
dialing.
b.
If you want to configure a one-stage dialing, a call route with destination IP address pointed to
the FXO gateway must be added in the “
Call Route
” list. The following figure shows the
sample configuration. In this way, the FXO gateway does not need to register to Micro VoIP
200.