Altesys Micro VoIP 200 User Manual Download Page 20

Page: 20 / 84

Micro VoIP 200

User Manual

v1.53

3. DHCP Server Configuration

By clicking the

DHCP Server

page, you can configure the DHCP server of the Micro VoIP 200.

You can specify the

DHCP Server IP Pool Start IP

and

DHCP Server IP Pool End IP

. Also you can

specify the

WINS Server (for Windows)

Micro VoIP 200 could possibly get the DNS server from ISP (using PPPoE or DHCP), if you want

this DNS server information passed to DHCP client, you can check on

Provide Real DNS Server

option.

Notice: this DHCP server configuration will work for both Notebook/PC and IP Phones if the

“DHCP only for IP Phones” box in User Management is disabled. If the “DHCP only for IP
Phones” box in User Management is enabled, this DHCP server will work only for IP Phones.

In the

Dynamic DHCP Client List

, you can see the active DHCP client lists.

Summary of Contents for Micro VoIP 200





















































































Search results

Summary of Contents for Micro VoIP 200

Reviews:

Brands by name

Popular brands

Altesys Micro VoIP 200, User Manual

Search results

Summary of Contents for Micro VoIP 200

Reviews:

Brands by name

Popular brands