manualshive.com logo in svg

Alternate Mode malletKAT PRO With Sounds, Manual, Page: 55 / 67

Share
Download
Alternate Mode malletKAT PRO With Sounds Manual Download Page 55

8. Appendix 

Appendix E:

System Exclusive Documentation.

MIDI allows you to SAVE your settings from MIDI instruments to data

disks and computers so you can back up your work.  This is called a
Data Dump

. 

The malletKAT PRO will send one of four different types of Data

Dumps of its settings out the MIDI OUT if you go to Global
Auxiliary Screen #3, see p.26.  The four types are: GLOBAL,  ALL
MEMORY

, ALL SETUPS, or any One Setup.

The malletKAT PRO will automatically accept or receive a Data

Dump via MIDI IN whenever one is sent, as long as your Individual
ID # setting matches the ID # in your dump.  If you select
“Universal ID #” for your Individual ID #, all dumps will be
received.

A malletKAT PRO SYSTEM EXCLUSIVE DATA DUMP consists of two

parts:

1)  A 9 byte “header” that describes the dump and
2)  The DATA!  The amount of data depends on type of dump. 

Followed by 0F7H (End of Sys Exc)

The 9 bytes of the header are defined below:

HEADER

:

byte 1:

(0F0H)  Start of System Exclusive Status Byte

byte 2:

(00H)

byte 3:

(00H)

byte 4:

(15H) [00H, 00H, 15H is KAT’s Company ID #.

byte 5:

(64H) Instrument type ID # for the malletKAT PRO.

byte 6:

(XX) 

Dump Type

byte 7:

(XX)

Individual Instrument ID #

byte 8:

(XX)

Software Version #

byte 9:

(XX)

Aux Type # (Kit # if Type is Kit)

DATA:

The DATA is split into nibbles and sent with a 0 for MSN.  It takes two

bytes of System Exclusive transmission for every byte of internal
malletKAT PRO information.

The amount of data for each type of dump is: 1Setup: 256, 

All Setups:32,768, Global:1022, All Memory:34,046

After all the DATA has been sent, the End of System Exclusive

Command (0F7H)  is sent.

(If the malletKAT PRO receives the above header with a software

version of 7FH (127), this will be interpreted as a Dump Request.
The malletKAT PRO will respond to this by sending out a dump of
the specified type, if the Individual ID # matches (or the
malletKAT PRO is set at Universal ID)).

55

Summary of Contents for malletKAT PRO With Sounds




































































Reviews:

No comments