manualshive.com logo in svg

Alternate Mode malletKAT PRO With Sounds, Manual, Page: 5 / 67

Share
Download
Alternate Mode malletKAT PRO With Sounds Manual Download Page 5

1. Introduction

KST1

 - Shell mount triggers for Toms

KDT1

 - Head mount triggers for all drums

KDT210 

- Heavy duty trigger for Snares & Toms,

modular design and easily removable

KDT250

 - Bass Drum version of above

Other Controllers...

drumKAT 3.5 

- The most powerful and advanced drum 

controller in the world

drumKAT  EZ - 10 pad controller, w/ Expander inputs
DK10 - Simple to use 10 pad drum controller
trapKAT - Big, 24 pad, drum controller

CD ROMS - Vintage, Ditto Disks, KATkits
Software Products (drumTUTOR, trapTUTOR)

PRODUCT OVERVIEW:

The malletKAT PRO With Sounds is a velocity sensitive MIDI

controller with a layout that is comfortable for mallet players.
The playing surface responds to a wide dynamic range and is very
comfortable to play on.  The playing pads are made of a sponge
rubber that was selected to resist wear and tear.  These pads
provide a comfortable rebound with mallet sticks, and quiet the
mallet impact sound.  

There are three Footswitch inputs.  One gets you in and out of EDIT.

When you hit any of the pads with the Edit Footswitch depressed,
you can make changes to the settings in your malletKAT PRO.

The other two footswitch inputs allow you to sustain sounds and control

the special “Hang Mode.” 

The MIDI IN jack allows you to retrieve saved Setups that you

previously saved to a “DataDisk” or other storage device.  The
MIDI IN jack also allows you to merge information from another
controller (or sequencer) through to the MIDI OUTs.  Also the MIDI
IN jack allows you to access the internal sounds from an external
controller or sequencer (see p.31).

There are two MIDI OUT jacks that carry the same information. One is

mounted on the side to give you more options when routing your
cables.  

A Breath Control input works with the BC-2 Breath Controller.  
Two FootControl inputs allow the use of expression or volume pedals to

add extra expression to your playing.  The Foot Control Inputs can
also be used to Advance and Backup through your Setups with your
feet.

The malletKAT PRO has a backlit display with four lines of sixteen

characters per line.  The four lines allow you to see a lot of
information in an easy-to-read format.  Even the viewing angle of
the display is adjustable.

The software in the malletKAT PRO allows you unbelievable control

and potential.  The malletKAT PRO has two independent
Controllers that you may use to Split the keyboard (one sound on
the left side of the keyboard and another sound on the right) or

5

Summary of Contents for malletKAT PRO With Sounds




































































Reviews:

No comments