manualshive.com logo in svg

Alternate Mode malletKAT PRO With Sounds, Manual, Page: 20 / 67

Share
Download
Alternate Mode malletKAT PRO With Sounds Manual Download Page 20

4. Editing

Settings:  

(Separately selectable per Controller except for Layer & Pressure)

Program

 (1-384) - Selects a sound or set of sounds on either your internal

sound source or your external sound source.  Select a number up to 384
to select one of the internal sound programs.  For more details see
p.35-36, p.22 and p.43.
Your Factory and original User Setups all have both Controllers in
BOTH Internal and External MIDI mode.  If however, you select
EXTernal MIDI mode Only, then you may select Program numbers
only up to 128.  External Programs over 128 are accessed through the
Bank Select #.   (see p.22)

Volume

 (0-127) - Overall volume of a patch on your sound source.  Gets

sent to the sound source when you enter a Setup.  This will be
overridden by the FootControllers if you are using them to control
Volume.

Velocity

 Curve (1-8) - How the loudness of a sound varies as your hits

vary from soft to hard hits.

Maximum

 Velocity (0-127) -How loud your hardest hits will play.

Minimum

 Velocity (0-127) - How loud your softest hits will play.

Octave

 (0 to 14) -The pitch range of the Controller.

Gate

 Time (15mS - 6.500 seconds) - The amount of time the malletKAT

PRO With  Sounds holds down or sustains notes for you.

SETUP

 (1-128) - An entire collection of settings that defines one state of

the malletKAT PRO With Sounds. 

Channel

 (1-16) - Setting for a Controller to select specific sound sources

or instruments in multi-timbral sound sources.  Whever the Channel
selection is changed, the current Bank and Program number, for that
Controller, are sent out MIDI.

Transpose

 (-12 to +12) - Offset for a Controller to move its pitch range

up or down in half steps.

(Poly/Mono)
Poly

 - For polyphonic playing.  The normal setting.  Chords can be

played, Gate Times can overlap.

Mono

 - For monophonic playing.  Great for lead lines, or for simulating

horns or other naturally monophonic instruments.

(Layer / Split / Hang) LAYER MODE
Layer

 -Controller Mode where entire keyboard is both Controller 1 &

Controller 2.  Acts as a Double Mode.

Split

 - Controller Mode where left of Split is Controller 2, right of

Split is Controller 1.

Hang

 - Controller mode where entire keyboard is Controller 1 when

Sustain 2 footswitch is not depressed.  Entire keyboard is Controller
2 when Sustain 2 footswitch is depressed.

20

Summary of Contents for malletKAT PRO With Sounds




































































Reviews:

No comments