Altera DE1-SoC, Manual, Page: 41 / 45

DE1-S
O
C C
OMPUTER
S
YSTEM WITH
N
IOS
II
For Quartus II 15.0
/********************************************************************************
* This program demonstrates use of floating-point numbers in the DE1-SoC Computer
*
* It performs the following:
*
1. reads two FP numbers from the Terminal window
* 2. pe, 1, *, and / on the numbers, then prints results on Terminal window
********************************************************************************/
int main( void )
{
float x, y, add, sub, mult, div;
while
(1)
{
printf ("Enter FP values X Y: \ n");
scanf ("%f", &x);
printf ("%f ", x); // echo the typed data to the Terminal window
scanf ("%f", &y);
printf ("%f
\ n", y); // echo the typed data to the Terminal window
add = x + y;
sub = x
−
y;
mult = x * y;
div = x / y;
printf ("X + Y = %f
\ n", add);
printf ("X - Y = %f \ n", sub);
printf ("X * Y = %f \ n", mult);
printf ("X / Y = %f \ n", div);
}
}
Figure 38. An example of code that uses floating-point variables.
Altera Corporation - University Program
2015
41