ALTER GM 140 Manual Download Page 3

    

GM 140 

   page    2  

of 12

                                                                                                                                  File: GM140_r0eng -  October 2003   -    Technical note: GM 140

    

GM 140 

   File: GM140_r0eng -  October 2003 - Technical note: GM 140                                                                                                                              

         

page     3  

of  12 

Contents

A

Alarms 12

C

CE Declaration  1

Cleaning  7

Components Layout  8

Components List  8

E

Environmental conditions  4

Equipment installation  4

Equipment Ratings  3

F

Fuses replacement  7

Fuses specifications  4

G

General Description  3

General Information  2

H

Handling instructions  4

How to order  12

O

Outside dimensions  9

P

Physical characteristics  4

Pin out of CONN. # 1,2, 3  con segnale esterno   10

Pin out of CONN. # 1,2, 3  con segnale interno   11

   

T

Technical Assistance  12

W

Warnings  2

Wiring   instructions  4

General Informations

This equipment satisfy the European Standard EN 61010-

1 (=CEI 66-5) (=IEC 1010-1) approved by CENELEC on 

9/3/1993.

With reference to EN 61010-1 standard, note:

this appliance must be installed and serviced only by quali-

fied personnel.

The appliance must only be used by persons acquainted 

with the regulations covering the application.

Note about EMC regulation: the generic emission standard 

EN50081-2 (title: Electromagnetic compatibility - Generic 

emission standard - Part 2: Industrial environment) sets 

that “Where a relevant dedicated product or product-family 

EMC emission standard exists, it shall take precedence over 

all aspects of this generic standard”. 

The equipments described in this manual have been clas-

sified as industrial, scientific and medical (ISM) radio-

frequency equipments and the related standard for the 

emission is the EN55011 (=CEI110-6) (title: Limits and 

methods of measurement of radio disturbance characteri-

stics of  ISM equipment.)

With reference to EN55011 standard, this equipment is 

included into Group 2 (Microwave generators, Thyristor 

command equipment, Welding equipment, Induction 

heating equipment or machine, Microwave industrial oven, 

etc.), Class A (industrial environment): for this reason this 

equipment shall not be used in the residential, commercial 

and light-industrial environment.

The GM140, when properly installed, complies with the 

limits of radio disturbance characteristic of a Group2, Class 

A equipments as stated by EN55011.

Copy of the tests performed may be sent on request. Be 

aware those tests cannot be used as a conformity certificate 

of the user’s final equipment.

WARNINGS

The GM140 is a microwave generator with 

output power of 0.3 kW @ 2.45 GHz.

People must not be exposed to the microwave 

energy which may be given off  by the magne-

tron or other microwave generator devices in 

case of incorrect use or connections.

All microwave input and output connections, 

waveguides,  flanges,  and couplings must be 

made safe.

Summary of Contents for GM 140














Reviews: