WIRED CONTROL
-
The first tests should always be carried out with the wired control, which is also used in the event of radio failure and for all the
finalizing.
-
The wired control is connected using the 24-pin IPRA port in place and instead of the radio control.
-
The steel cable must be attached to the machine with the shackle provided.
-
The commands of the radio control have identical abbreviations and markings; only the start-up mode is different (see the radio
control instructions).
Movement
control
Forwards
Backwards
Radio control
on/off and
(Hydraulic unit
stop)
Emergency
stop
Belt speed
control
Right left
rotation
(OPTION)
Unwinder
control
Forwards
Backwards
Hydraulic unit
start
Movement
speed
control
Summary of Contents for DR 160S AXIALE
Page 1: ...THESE INSTRUCTIONS MUST BE READ BEFORE USE...
Page 5: ......
