Altec ATP3000, User Manual

Page: 39 / 63

38
+31(0)78 - 615 20 33
info@altec.nl
www.altec.nl +32(0)2 - 270 34 88
info@altec.be
www.altec.be
NL BE
Selections Description
Feed Printer will advance one label
Calibration Printer will calibrate the sensor levels, determine
length and feed label
Length Printer determine length and feed label
No motion Printer will not move media
Head close This option is used to set the action of the media when you turn on the
printer.
Selections Description
Feed Printer will advance one label
Calibration Printer will calibrate the sensor levels, determine
length and feed label
Length Printer determine length and feed label
No motion Printer will not move media
No motion
Label top This option is used to adjust print position vertically on the label.
The range is -120 to +120 dots. 0
Left position This option is used to adjust print position horizontally on the label. The
range is -9999 to +9999 dots. 0
Reprint mode When reprint mode is enabled, you can reprint the last label printer by
pressing button on printer’s control panel. Disabled
Format convert Selects the bitmap scaling factor. The first number is the original dots
per inch (dpi) value; the second, the dpi to which you would like to scale. None
Note: If printing from enclosed software/driver, the software/driver will send out the commands, which will
overwrite the settings set from the panel.