Altec ATP3000, User Manual

Page: 38 / 63

37
+31(0)78 - 615 20 33
info@altec.nl
www.altec.nl +32(0)2 - 270 34 88
info@altec.be
www.altec.be
NL BE
Item Description Default
Density Use this item to setup printing darkness. The available setting range is
from 0 to 30. You may need to adjust your density based on selected
media.
16
Print speed Use this item to setup print speed. Available setting range is 1~7 for
300dpi. 3
Tear off This item is used to fine tune media stop location. Available setting value
range is from -120~120 dots. 0 dot
Print mode This item is used to set the print mode. There are 6 modes as below:
Printer mode Description
Tear off Next label top of form is aligned to the print head
burn line location.
Peeler off Enable the label peel off mode.
Cutter Enable the label cutter mode.
Rewind Enable the label rewind mode.
Tear off
Print width This item is used to set print width. The available value range is 2 ~ 999
dots. 812
List fonts This feature is used to print current printer available fonts list to the label.
The fonts stored in the printer’s DRAM, Flash or optional memory card. N/A
List images This feature is used to print current printer available images list to the
label. The images stored in the printer’s DRAM, Flash or optional memory
card. N/A
List formats This feature is used to print current printer available formats list to the
label. The formats stored in the printer’s DRAM, Flash or optional
memory card. N/A
List setup This feature is used to print current printer configuration to the label. N/A
Control prefix This feature is used to set control prefix character. N/A
Format prefix This feature is used to set format prefix character. N/A
Delimiter char This feature is used to set delimiter character. N/A
Media power up This option is used to set the action of the media when you turn on the
printer.
No motion