21
The FA-524, configured in two stereo ways,
has 1 BYPASS card located at position 4 and 3
frequency cards at positions 2, 3 and 5. Normally
the subwoofer will go overlapped with the low
output, because of what the frequency card at
position 1 will go overlapped. The correspondence
of them gone out with the component overlay of
the crossover is showed in the next picture.
On the other hand if we configured the crossover in MONO mode, we will have 6, 5, 4
or 3 MONO ways in the FA-724 and of 4 or 3 MONO ways in the FA-524:
SIX MONO WAYS (ONLY FA-724):
In order to configure the divisor of frequency FA-724 in six mono ways, we should place
the 6 frequency cards at positions 1,2,3,4,5 and 6. Doesn't have BYPASS cards. Normally
the subwoofer will go
overlapped with the low
output, because of what
the frequency card at
position 1 will go over-
lapped. The correspon-
dence of them gone out
with the component
overlay of the crossover is showed in the next picture.
FIVE MONO WAYS (ONLY FA-724):
The FA-724, configured in five
mono ways, has 1 BYPASS card
placed at position 1 and 5 fre–
quency cards at positions 1, 2, 3, 4
and 5. Normally the subwoofer will
go overlapped with the low output,
because of what the frequency card
at position 1 will go overlapped.
The correspondence of them gone out with the component overlay of the crossover
frequency is showed in the next picture. We will also have the HIGH CH2 output at FULL
RANGE.
FOUR MONO WAYS
The FA-724, configured in four ways mon-
key has 2 BYPASS cards placed at positions 5
and 6 and 4 frequency cards at positions 1, 2,
3 and 4. Normally the subwoofer will go over-
lapped with the low output, because of what
the frequency card at position 1 will go over-
lapped. The correspondence of them gone out
with the component overlay of the crossover is
showed in the next picture. We will also have
the MID CH2 and HIGH CH2 outputs at FULL
RANGE.
FA-724
FA-724
FA-524
FA-724
