Altai Technologies Ltd. All rights reserved
Altai A2n WiFi Access Point/Bridge Web-Admin Configuration Manual
TPS13-001_rev1.0
Figure 5-67 5G bridge security setting-Open & WEP
Figure 5-68 5G bridge security setting-Open & AES
1.
Cipher Mode
: Default setting is "Disabled". Cipher Mode can have three settings
"Disabled", "WEP" or "AES. If set to "Disabled", no encryption is used and all data is
transmitted without encryption. If set to "WEP", then WEP encryption is used and
all data is transmitted with WEP encryption. The type of WEP encryption and key
settings are determined by the entries in the WEP Key Table. If set to "AES", then
AES encryption is used for packet encryption. Under AES encryption, each bridge
entry could be specified with a 128-Bits HEX key.
2.
Pass Phrase
: 128-Bits HEX key.
3.
Default WEP Key
: There is no default setting. Configuration of WEP keys when the
Cipher Mode is set to WEP
5.3.2.6.
5G Advanced Configuration
