Altai Technologies Ltd. All rights reserved
Altai A2n WiFi Access Point/Bridge Web-Admin Configuration Manual
TPS13-001_rev1.0
1.
Select
Configuration-
>
Network
->
Sate Mode
2.
Enable Safe Mode
: Select it to enable STP function. By default, it is disabled.
3.
Ping Host
: at least input one host
4.
Ping Interval:
input the interval of ping
5.
Click
Submit
6.
Click
Save&Apply
to apply
5.3.
Wireless
Select
Configuration
->
Wireless
to access wireless network configuration page. There
are 2 interfaces, Radio0 (2.4G) and Radio1 (5G):
Figure 5-22 2.4G radio setting
5.3.1.
2.4G Radio
Select
Configuration
->
Wireless
->
Radio0 (2.4G)
to change 2.4G radio setting. You
can configure the items below: General, WLAN, Advanced and WEP.
5.3.1.1.
2.4G General configuration —AP Mode
Select
Configuration
->
Wireless
->
Radio0 (2.4G)
->
General
to access 2.4G general
configuration page:
