Altai Technologies Ltd. All rights reserved
Altai A2n WiFi Access Point/Bridge Web-Admin Configuration Manual
TPS13-001_rev1.0
Figure 5-6 Basic System Setting
System
Name
：
Set system name of the device, the system name can be up to 255
characters long.
System
NE
ID
：
Set system NE ID, the system NE ID can be up to 64 characters long.
System
Location
：
Set system location, the system location can be up to 255
characters long.
Enable
NTP
：
Enable or disable NTP function, by default it is selected.
IP
Address
Type
：
IPv4 or IPv6. (Please note that IPv6 is available to be select after
enable IPv6 on Network setting web page).
NTP
Server
IP
：
NTP server IP address, please click “ ” to add new NTP server IP
address.
NTP
Polling
Interval
：
By default, it is 600s
NTP
Time
Zone
：
Time Zone setting, by default it is Asia/Hong Kong.
Daylight
Saving
Time
：
By default, it is not selected.
Procedures:
1.
Select
Configuration
->
System
，
to go to system setting page.
2.
Type in the system information if it is needed.
3.
Add NTP IP address in
NTP
Server
IP
.
4.
Set
NTP
Polling
Interval
5.
Choose local
NTP Time Zone
