23
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
Grounding Protection
The A8n (ac) series must be properly connected to earth ground.
Failure to do so may result in equipment damage, injury or death.
Product warranty does not cover damage resulting in part or in whole
from improper grounding. An external grounding wire must be installed,
especially when A8-Ein (ac) is deployed on a non-metal pole or the
metal pole is not properly grounded. Please consult your location’s
building and electrical codes and follow them, or consult standards
such as National Electric Code. The grounding screw is located at the
bottom of A8n (ac) series as showed in figure 30. Use 10 AWG wire with
corrosion-resistant connectors for connecting to one or more approved
grounding rods or building’s earthing network. Earth-to-ground
resistance should not be more than 10ohms.
1.
Loose the grounding screw of A8n (ac) series.
2.
Attach a length 10 AWG bare copper with a terminal connector
to the grounding screw.
3.
Tighten the screw nut.
4.
Connect the other end of grounding wire to grounding rods or
earth ground.
Figure 31 Grounding Screw
Grounding
Screw
