21
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
antenna RF port junction is tightly sealed. Press the tape edges
together so that there are no gaps. Press the tape against the RF
cable connector body and the A8n (ac) series 5GHz antenna RF
port.
3.
Start wrapping a layer of electrical tape 1” (25mm) below the butyl
rubber tape, overlapping at half-width. Finish the wrap at the base
of the A8n (ac) series 5GHz antenna RF port and cut the tape.
Repeat this process for a second layer, and if enhanced UV
protection is required, a third layer.
