10
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
Mounting A8n (ac) and A8in (ac) on Pole
1.
Assemble the mounting kit according to Figure 12 with one side
of the screw installed.
2.
Mount the kit to the pole at the desired height and tighten all 4
screws to fix its position (Figure 13).
3.
The mounting kit must be installed with the key hole pointing
direction (Figure 14).
4.
Clamp the unit to the mounting kit, as shown in Figure 15 and
make sure the mounting screw is locked in the key hole.
5.
Screw in 4 locking screw to secure A8in (ac) with the mounting
kit (Figure 15).
6.
The mounting kit will fit with pole diameter from 1 inch to 3
inches.
Figure 12 Mounting kit assembly
Figure 13 Completion of Mounting
Figure 14 mounting screw locking direction
Figure 15 Clamping and secure the unit on
pole
