19
Altai A8n (ac) Series Super WiFi Base Station
Installation Guide
Altai Technologies Ltd. All rights reserved
2.
Loosely connect all the RF cables from each RF port. Do not tighten
up any of the connections.
3.
Secure the RF cable bundles to the pole.
4.
Tighten the RF cable connectors around the A8n (ac) series 5GHz
antenna ports with a torque wrench to the proper torque limit to
ensure that correct internal seals and surface contacts are made. If
a torque wrench is not available, first tighten the connector to finger
tight, then tighten it with a wrench for an additional ⅛ to ¼ turn from
the finger tight position.
5.
Weatherproof the A8n (ac) series antenna ports.
Weatherproofing on A8n (ac) 2.4GHz Radio Antenna
Ports
1.
Start wrapping a layer of electrical tape from 1/4” (6mm) above the
edge of the RF cable connector. Overlap the tape to half –width.
The tape should cover the RF cable connector body, and extend 1”
(25mm) above the cable connector clamping nut.
The tape can be applied in one or more strips if necessary. A strip
can be coiled onto an applicator such as a pencil. Apply only
enough tension to get good adhesion and keep the tape smooth.
